Low wall railings.
This refers to short wall railings, those under 600mm tall. This size has its design limitations because it can usually only accept one decorative item on a bar. But there is a mass of possibilities you can design. The length of your railing plays an important part, the longer it is the more uprights you have, The more uprights the more bars there are that can be replace to create a wrought iron railing design.
So I am going to put 10 designs of each size as example. These sizes are based on the wall and railing section. Which is a useful reference page contained with in this website. This will give 180 examples. This is a tiny amount compared to what is possible .but these are examples to give you ideas, to allow you to create your own design.
a(
Sizes
Click to jump directly to the size you require.
910mm long
910mm
The base 910 railing plain. When using 100mm bar spacings this will contain 8 upright bars
A pair of twists, with possible alternate positions
Circles showing alternative positions
Instead of using bars for decoration, here gap fillers are used
What you use as a fillers is your choice, but you can combine gap fillers and bars.
Because these are short railings, there may be limitations on which S scroll you can use
More examples using S scrolls,
Don’t forget these can be flipped upside down
More examples of using gap fillers to create a design.
Cages
A single gap filler is always an option/
We have easily managed 20 designs, and we have hardly scratch the surface. Because it is such a small railing size it is harder to create suitable designs. Not all parts from the available listed were used. But its obvious there is many more possible designs there for you to discover.
1022mm long.
This size contains a centre, i always find it easier when one is present. Just seems easier to create a design.